CONTENTS
NAV BAR LINKS
HANDBOOK
HANDBOOK
Introduction page
Systems Overview page
Opening page
Opening Checklist
Opening from Temp Closedown
Opening Checklist - Details
- Check Dry N2 Levels
- Open Hall Door
- Close Double Doors
- Open Vent
- Check Cable Wrapups
- Safety Walk Around
- Turn off Spotlights
- Fill Dewar
- Turn Telescope Cameras On
- Stow Platform
- Reboot Cyan
- Login to Teal
- XTCS Config - restore tcs
- XTCS Config - set instrumnet
Start Here from Temporary Closedown
- Retract Awning
- Open Catwalk Doors
- Turn On Oil Pumps
- Turn On Drives
- Turn Off High Domes
- Open Dome Shutter
- Open Mirror Cover
- Turn On Fans
- Turn on Monitors
- Turn On Slit Camera
- Turn AUTO on
- Initialize Telescope in XTCS
- Tun on Dome Tracking
- Check Pointing
- Focus and Observe
Observing page
Closing page
Closedown Checklist
Temporary Closedown
Closedown Checklist - Details
- Conclude observing and turn off the guiding
- Turn down cameras
- Stow telescope
- Wait for Dome to Stop Moving
- Turn off AUTO
- Turn off telescope and building fans
- Close mirror cover
- Close dome shutter
- Turn off drives and pre-loads
- Turn off oil pumps and cancel alarm
- Close catwalk doors
- Deploy Yellow Awning
End of Temporary Closedown
Continue for Full Closedown
- Turn off all monitors and slit camera
- Turn on high dome lights
- Move Platform Under Telescope
- Turn off cameras on telescope
- Fill the dewar
- Turn on Telescope Spotlights
- Fill out log and enter any service requests
- Open double doors
- Close sliding vent panel
- Close hallway door
- Report info to x8620
- Log out of teal
Troubleshooting page
END of HANDBOOK
Send change requests to
ScopeManualChanges@noao.edu
2 meter Observers Handbook
Version 4.0
This page last updated
October 5, 2003